FE260-175
Door Holder, Universal Adjustable Tube, 400N, with Release Button, 175 mm
- Low power - 1.6 W
- 400 N holding force
- Anti-remnant ejector
- Spark suppression diode and reverse polarity protection
- Release button
Related products
At a glance
General
The FE260-175 is a floor/wall mount door holder with a universal adjustable tube with a reach of 175 mm when used in 180° configuration and 150 mm used in 90° configuration. Which offers a 400N holding force and a release button.
Magnet construction
The magnet is constructed with a pressed coil and anti-remenance pin, giving it a protection of IP54. The protection diodes are integrated into this construction.
Adjustable
The “head” of the FE260-175 allow for two mounting options. The first being the 180° configuration, which is normally used when the door holder is mounted on the wall. In this configuration, the magnet is located “on-top” of the tube.
And the second configuration being the 90° configuration, which is normally used when the door holder is mounted on the ground. In this configuration, the magnet is located on the “side” of the tube, as shown in the picture.
To allow for even more flexibility, the tube can also be cut shorter to match the exact distance required.
And the second configuration being the 90° configuration, which is normally used when the door holder is mounted on the ground. In this configuration, the magnet is located on the “side” of the tube, as shown in the picture.
To allow for even more flexibility, the tube can also be cut shorter to match the exact distance required.
Installer friendly
- For practical ease of installation, the door holder comes complete with electrical screw terminals.
- The base is predrilled in a practical, standard format for rapid mounting.
- The door holder is supplied complete with a keeper plate, which offer angular adjustment.
- The base is predrilled in a practical, standard format for rapid mounting.
- The door holder is supplied complete with a keeper plate, which offer angular adjustment.
Approvals
The FE260-175 is fully approved according to EN1155.
Details
- Low power - 1.6 W
- 400 N holding force
- Anti-remnant ejector
- Spark suppression diode and reverse polarity protection
- Release button
- EN1155 approved
- Adjustable
- Keeper plate included
Technical specifications
| General | ||
|---|---|---|
| Holding force N (Newton) |
400
|
|
| Release button |
Yes
|
|
| Spark supression diode |
Yes
|
|
| Reverse polarity protection |
Yes
|
|
| Electrical | ||
|---|---|---|
| Power supply type |
24 VDC
|
|
| Power consumption |
1.6 W
|
|
| Duty cycle |
100%
|
|
| Physical | ||
|---|---|---|
| Physical dimensions |
90 x 80 x 150 mm (H x W x D) 90° setup
90 x 80 x 175 mm (H x W x D) 180° setup
|
|
| Environmental | ||
|---|---|---|
| IP rating |
IP54 (magnet)
IP42 (connection)
|
|
| Regulatory | ||
|---|---|---|
| Standards |
EN1155
|
|
Downloads
All downloadsDatasheet
Other EU certificate
Other EU certificate
Xref List
Other EU certificate
VDS
Other EU certificate
Other EU certificate
VMC_B-9212-FD-916-c_KFP-CF2 series
Other EU certificate
VMC_B-9212-FD-919-b_ZP1-F2 series
Other EU certificate
VMC_B-9212-FD-914-b_1X-F2 series
Other EU certificate
VMC_B-9212-FD-907-d_2X-F1 series
Other EU certificate
VMC_PR-1751/064_ZP-2 (2010-2 series)
Other EU certificate
VMC_PR-1724/064_ZP2
Other EU certificate
VMC_PR-1723/064_KFP-A
Other EU certificate
VMC_PR-1720/064_2X
Other EU certificate
VMC_PR-1719/064_2X
Other EU certificate
VMC_APF-1360_2X
Other EU certificate
VMC_APF-1326_ZP2
CPD / CPR
Other technical documentation
Certificates
If available, the downloads of the Certificates, Software & Firmware and Media are displayed in their default language.