PM863
Power supply, Switch Mode, 24 VDC, 3 A
- Fault and mains present indicators
- Battery disconnect to prevent deep discharge
- Tamperswitch
- Fault outputs
- Mains and dc fuse
Related products
At a glance
This efficiency cost effective power supply is ideal for use in Fire, Access control and general security applications.
Featuring a regulated 27.6 Vdc output supplying continuous full rated current to load plus additional current for charging two x 12V standby batteries.
The highly efficient switch mode design ensures low operating costs, generates less heat and with a small physical size increases the room available for additional PCBs or cables. The modular construction simplifies maintenance.
Featuring a regulated 27.6 Vdc output supplying continuous full rated current to load plus additional current for charging two x 12V standby batteries.
The highly efficient switch mode design ensures low operating costs, generates less heat and with a small physical size increases the room available for additional PCBs or cables. The modular construction simplifies maintenance.
Details
- Fault and mains present indicators
- Battery disconnect to prevent deep discharge
- Tamperswitch
- Fault outputs
- Mains and dc fuse
- Powder coated steel housing
Technical specifications
| General | ||
|---|---|---|
| Fuse(s) |
230 VAC input 2 A, 12/24 V output 3 A
|
|
| Electrical | ||
|---|---|---|
| Mains input |
230 VAC
50/60 Hz ±10%
|
|
| Load output | 2 A | |
| Output | ||
|---|---|---|
| Power output voltage |
27.6 VDC
|
|
| Output ripple |
100 mV pk-pk max.
|
|
| Power output current mains |
3 A
|
|
| Battery | ||
|---|---|---|
| Max. Battery capacity |
7.2 Ah (x2)
|
|
| Battery charge current |
1 A
|
|
| Battery recharge time |
20 hours
|
|
| Battery disconnect voltage |
19.6 ±0.2 VDC
|
|
| Physical | ||
|---|---|---|
| Physical dimensions |
330 x 275 x 80 mm (W x H x D)
|
|
| Colour |
White
|
|
| Form factor |
Steel cabinet
|
|
| Environmental | ||
|---|---|---|
| Operating temperature |
-10 to +40°C
|
|
| Relative humidity |
95 %
|
|
| Regulatory | ||
|---|---|---|
| Compliancy |
CE
REACH
RoHS 2
WEEE
|
|
| Outputs | ||
|---|---|---|
| Open collector output | Open circuit on | |
| Open collector output | Fault or Mains Fail | |
| Open collector output | 0 V, 100 mA | |
| Housing (steel) powder coated | ||
|---|---|---|
| 1.2 mm | ||
Downloads
All downloadsDatasheet
Installation sheet
Certificates
If available, the downloads of the Certificates, Software & Firmware and Media are displayed in their default language.