Przejdź do treści

KE-IO3101-M

Inteligentny adresowalny moduł sterownia zasilaniem (1 wyjście) z izolatorem zwarć
  • Zasilany z pętli, bez dodatkowych kosztów zasilaczy i instalacji
  • Zapewnia adresowalne wyjście z dwubiegunowymi, bezpotencjałowymi stykami przełącznymi
  • Wyjście normalnie otwarte / normalnie zamknięte, pełna elastyczność instalacji
  • Programowalna aktywacja dowolnym pobudzeniem wejściowym
  • Montaż DIN lub naścienny
Wyświetl wszystkie

Na pierwszy rzut oka

General

The innovative Excellence series of intelligent addressable devices offers advanced features for reliability and peace of mind. Coupled with features for ease of installation and maintenance on new fire detection systems, it’s a perfect match for exceptional overall performance.
The Excellence series input/output devices are designed to provide much needed flexibility to input monitoring and output switching. These modules, combined with the powerful features of a Kidde Excellence series addressable CIE, give customers versatility for diverse applications.
The KE-IO3101-M is an Excellence series addressable mains relay unit with integrated short circuit loop isolation. Powered directly from the Excellence loop, it offers double pole, potential free, change-over relay contacts.

Applications

The KE-IO3101-M is designed for controlling the main electrical supply of ancillary, mains powered equipment. The unit is ideal for the control of door release circuits, extract fans and dampers. The relay may be programmed to be activated by any single device, groups of devices or all system devices. All types of system input signals can be arranged to operate the KE-IO3101-M which can include control panel indicators, zonal outputs, call points or detectors. Both normally closed and normally open relay connections are provided, which if wired incorrectly, can simply be reconfigured in the programming of the unit.
The KE-IO3101-M may be located anywhere on the Kidde Excellence loop where it occupies only 1 of 128 available addresses. Housed in a low profile molding, the interface is designed to clip directly onto a standard DIN rail fixing or be installed in a suitable wall mount housing. It is intended for installation for installation inside the equipment to be switched, thereby offering savings in installation costs

Installation & Maintenance Features

The KE-IO3101-M is connected to the CIE via a 2-wire communication loop that carries both power and control data. Tri-Colour LED indicators positioned on the front face of the unit provide the engineer with clear identification of the operational state of the unit, as well as the status of any input and/or output control. Additional manual test facilities on the unit allows local testing without the need for control panel intervention, saving time during installation and commissioning.
Excellence series devices use an advanced digital data communications protocol with extensive error correction algorithms to ensure system reliability.

Szczegóły

  • Zasilany z pętli, bez dodatkowych kosztów zasilaczy i instalacji
  • Zapewnia adresowalne wyjście z dwubiegunowymi, bezpotencjałowymi stykami przełącznymi
  • Wyjście normalnie otwarte / normalnie zamknięte, pełna elastyczność instalacji
  • Programowalna aktywacja dowolnym pobudzeniem wejściowym
  • Montaż DIN lub naścienny
  • Funkcja testowania lokalnego ułatwiająca weryfikację działania
  • Lokalny, czytelny wskaźnik stanu pracy ułatwiający konserwację

Specyfikacja techniczna

General
Status indication
Trójkolorowa dioda LED
Compatibility
Systemy Kidde Commercial Excellence
Addressing method
Mikroprzełączniki
Address range
1 do 128
Electrical
Power supply type
Zasilanie pętlą
Operating voltage
17 do 29 VDC
Current consumption
300 μA @ 24 VDC (spoczynek)
2,5 mA @ 24 VDC (aktywacja)
Communication voltage
4 do 11 V (pulsujące)
Output
Output quantity
1 x Dwubiegunowy
Output type and rating
Podwójne przełączanie - 1 A @ 60 VDC / 5 A @ 250 VAC (obciążenie oporowe)
Cable specification 0.13 to 3.31 mm² (12 to 26 AWG) shielded/unshielded twisted-pair
Isolation
Type
Negative line break
Loop current
2,5 mA (aktywne)
Series resistance
<0,08 Ω
Switch current
1,05 A (ciągły) / 1,4 A (krótki)
Leakage current
<1 mA
Isolation voltage
14 do 15,5 VDC
Reconnect voltage
14 do 15,5 VDC
Impedance requirements ≤ 32 devices between isolators
Quantity per loop 128
Physical
Physical dimensions
109 × 88 × 40 mm (S x W x G)
Net weight
220 g
Colour
Biel sygnałowa (RAL 9003)
Mounting type
DIN-rail
Montaż nawierzchniowy
Wall mount
Material
PC / ABS
Cable specification
Loop: 0.13 to 3.31 mm² (12 to 26 AWG) shielded/unshielded twisted-pair < 52 Ω , < 500 nF
Environmental
Vandal proof
No
Operating temperature
-22 do +55°C
Storage temperature
-30 do +65°C
Relative humidity
10 do 93% bez kondensacji
Environment
Indoor
IP rating
IP30
Regulatory
Compliancy
CE
REACH
RoHS 3
WEEE
Certification
CPR
Standards
EN54-17, EN54-18

Pobrania

All downloads

Karta katalogowa

Instrukcja montażu

Swiadectwa

Jeśli są dostępne, pliki do pobrania Certyfikatów, oprogramowania i oprogramowania sprzętowego oraz nośników są wyświetlane w ich języku domyślnym.