Overslaan en naar de inhoud gaan

ATS1115A-N

Advisor Advanced betjeningspanel 2x16 karakter LCD med integreret kort læser
  • 2 x 16 characters LCD
  • User adjustable buzzer
  • User adjustable LCD contrast
  • 16 Area indication
  • Door release indication
Alles weergeven

Alternatieve producten

Gerelateerde producten

Overzicht

Remote Arming Stations

The ATS1115A is part of the Advisor Advanced product family. A range of keypads and card readers is available that can be used in different environments, in and out-door. The ATS1115A can be used for configuration and management of the system, as well as for opening doors and arming/disarming areas. In an easy way, the ATS1115A gives a status overview from your security system with both visual and audio indicators.

Product Overview

The ATS1115A is a modern ergonomic design and has a clearly readable text on a 2 x 16 characters LCD for displaying system programming, alarm and access control functions. The viewing angle of the display is adjustable via the keypad as well as the volume level of the built-in buzzer. Four arrow keys will navigate the user easily through the programming and operational features and 4 additional functions key will complete this user-friendly interface.

Built-in card reader

The ATS1115A has a built in smart card reader. The ATS1115A can be used for arming/disarming using either the PIN or the card or a combination of the two for higher security needs. It is suitable for using the multiple card badging techniques which are available for the Advisor Advanced product family. A user can set the system in the evenings by badging his card three times within 10 seconds interval. Another application could be for doors which can be programmed so that badging once unlocks the door to allow people in and out without card, and badging three times re-locks the door.

Indications

Four status LED's will continuously update the user on mains condition, faults, access control and alarms.
Green - Power LED is on when the control panel is powered by the AC supply.
Yellow - Fault LED illuminates to indicate detection of a system fault.
Blue - Access LED flashes when access to an area assigned to the RAS is granted.
Red - Alarm LED illuminates when there is a system tamper or an area assigned to the RAS is in alarm state.
The Arming Station can display the status of 16 areas using 16 LED's on the front, while the LCD shows details of alarms or a pre-programmed text.
The area may be identified by viewing the 16 area LEDs visible when the RAS cover is open or removed and the indications are as follows:
• The LED illuminates when its corresponding area is armed.
• The LED flashes slowly when a fault is detected.
• The LED flashes quickly when an alarm occurs.

Mounting

The RAS cover is hinged at the bottom. To open, grasp the cover at the sides or the top and pull gently — the cover will swing down on its pins. The cover may be fully removed by gently prising one of the pins away from the body of the RAS and pulling. The metal mounting plate at the rear is held by a locking screw.

Details

  • 2 x 16 characters LCD
  • User adjustable buzzer
  • User adjustable LCD contrast
  • 16 Area indication
  • Door release indication
  • Built-in smart card proximity reader

Technische specificaties

General
User interface
2 x 16 Char LCD
Touch-Tasten
Product line
Advisor Advanced
Status LEDs
16
Integrated reader
Nærhed
System
Function keys
4
Supported card types
HiTag2
Addressing type
Dip-Schalter
Supported cable type
WCAT 52/54 or equivalent
Communication
Communication type
Kablede
Inputs/Outputs
Inputs
1
Input type
Request to Exit
Outputs
1
Output type
Open collector, 50 mA Max
Electrical
Operating voltage
9 - 14 VDC
Current consumption
35 mA typical
165 mA max.
Physical
Physical dimensions
92 x 165 x 25 mm
Colour
Hvid
Form factor
Lodret
Cover
Flip-Abdeckung
Mounting type
Overflademontering
Environmental
Operating temperature
0 to +50°C
Relative humidity
0 to 95% noncondensing
Environment
Indendør
IP rating
30
Regulatory
EN50131 grade
Lønklasse 3
Compliancy
CE
RoHS
Certification
VdS