Passar para o conteúdo principal

KE-IO3122

Unidade Inteligente Endereçável de 2 Saída / 2 Entradas, com isolador
  • Alimentado pelo loop, reduzindo custos de instalação
  • Fornece 2 entradas e saídas individualmente programáveis e endereçáveis num único endereço, poupando endereços do loop
  • Entradas de dois níveis, totalmente supervisionadas, com supervisão de pré-alarme e alarme utilizando uma única entrada
  • Programável normalmente aberto / normalmente fechado para total flexibilidade de instalação
  • Relés de saída com retenção magnética para reduzir a carga do loop
Ver todas

Produtos relacionados

Num relance

General

The innovative Excellence series of intelligent addressable devices offers advanced features for reliability and peace of mind. Coupled with features for ease of installation and maintenance on new fire detection systems, it’s a perfect match for exceptional overall performance.
The Excellence series input/output devices are designed to provide much needed flexibility to input monitoring and output switching. These modules, combined with the powerful features of a Kidde Excellence series addressable CIE, give customers versatility for diverse applications.
The KE-IO3122 an Excellence series addressable 2 input/2 output unit with integrated short circuit loop isolation. Powered directly from the Excellence loop, it offers 2 inputs with selectable line supervision and 2 magnetically latched relay outputs.

Applications

The KE-IO3122 is designed to monitor any potential free contacts, and independently switch outputs for control of equipment. Any normally open or normally closed contact may be selected to be supervised or unsupervised. Normal, open, passive, active or short circuit states on the input are reported back to the CIE where, depending on the programming, separate actions may be taken for any of these states. Every output is a magnetically latched relay providing a potential free change-over contact. The output relays do not require power in either the active or passive states, saving on overall loop loading.
The KE-IO3122 may be located anywhere on the Kidde Excellence loop where it occupies only 1 of 128 available addresses. Housed in a low profile molding, the interface is designed to clip directly onto a standard DIN rail fixing or be installed in a suitable wall mount housing.

Installation & Maintenance Features

The KE-IO3122 is connected to the CIE via a 2-wire communication loop that carries both power and control data. Tri-Colour LED indicators positioned on the front face of the unit provide the engineer with clear identification of the operational state of the unit, as well as the status of any input and/or output control. Additional manual test facilities on the unit allows local testing without the need for control panel intervention, saving time during installation and commissioning.
Excellence series devices use an advanced digital data communications protocol with extensive error correction algorithms to ensure system reliability.

Detalhes

  • Alimentado pelo loop, reduzindo custos de instalação
  • Fornece 2 entradas e saídas individualmente programáveis e endereçáveis num único endereço, poupando endereços do loop
  • Entradas de dois níveis, totalmente supervisionadas, com supervisão de pré-alarme e alarme utilizando uma única entrada
  • Programável normalmente aberto / normalmente fechado para total flexibilidade de instalação
  • Relés de saída com retenção magnética para reduzir a carga do loop
  • Livremente programável para atuar a partir de qualquer combinação de entrada
  • Caraterísticas de teste locais para facilitar a validação
  • Indicação local e clara do estado de funcionamento para facilitar a manutenção

Especificações técnicas

General
Status indication
LEDs tricolores
Compatibility
Sistemas Excellence da Kidde Commercial
Addressing method
DIP Switches
Address range
1 a 128
Electrical
Power supply type
Alimentado por loop
Operating voltage
17 a 29 VDC
Current consumption
2.5 mA @ 24 VDC (activo)
300 µA @ 24 VDC (standby)
Communication voltage
4 to 11 V (impulso)
Input
Input quantity
2
Input type and rating
Bi-nível, Supervisionado
Input states
Ativo
Fault
Normal
Aberto
Curto
Pre-alarm resistor
3 kΩ a 7 kΩ
Alarm resistor
7 kΩ a 27 kΩ
Termination resistor
15 kΩ, ¼ W, 1%
Cable specification 0.5 to 4.9 mm² (10 to 20 AWG) shielded/unshielded twisted-pair
Output
Output quantity
2
Output type and rating
Relé, 2 A @ 30 VDC (carga resistiva)
Cable specification 0.13 to 3.31 mm² (12 to 26 AWG) shielded/unshielded twisted-pair
Isolation
Type
Interrupção linha negativa
Loop current
2.5 mA (activo)
Series resistance
<0.08 Ω
Switch current
1.05 A (constante) / 1.4 A (curto)
Leakage current
<1 mA
Isolation voltage
14 a 15.5 VDC
Reconnect voltage
14 a 15.5 VDC
Impedance requirements ≤32 devices between isolators
Quantity per loop 128
Physical
Physical dimensions
148 x 102 x 27 mm (L x A x P)
Net weight
135 g
Colour
Sinal branco (RAL 9003)
Mounting type
DIN-Hutschiene
Montagem em superfície
Wandmontage
Material
PC / ABS
Cable specification
Loop: 0.13 to 3.31 mm² (12 to 26 AWG) shielded/unshielded twisted-pair < 52 Ω , < 500 nF
Environmental
Vandal proof
No
Operating temperature
-22 a +55°C
Storage temperature
-30 a +65°C
Relative humidity
10 a 93% sem condensação
Environment
Drinnen
IP rating
IP30
Regulatory
Compliancy
CE
REACH
RoHS 3
WEEE
Certification
CPR
Standards
EN54-17, EN54-18