Skip to main content

KE-AS3010W-IP

Excellence Series intelligent addressable weatherproof sounder
  • Supplied with IP rated, surface mount base accessory ensuring sufficient ingress protection for outdoor applications
  • Top, bottom or rear cable entry support for application flexibility
  • Standard first fix base shared with point detectors for ease of planning, logistics and installation
  • Base lock, address tag and surface cabling support for easy installation in all conditions
  • Loop powered with battery assisted activation allowing up to 128 devices per loop
View all

At a glance

General

The AS2364W is a WHITE bodied, deep base addressable room sounder for fire alarm systems running 2000 series addressable fire protocol. Multiple tone selection and full CPD approval ensure conformance to local regulations.

The sounders operate over a 2-wire 2000 series loop and are loop powered i.e. no external power supply is required. They are compatible with automatic phased-start synchronisation controlled from the fire panel. The AS2364W has a IP65 enclosure.

Installation

Device cabling is done to the base and allows the sounder to be fitted and locked into position afterwards. A separate earth terminal is provided in the base for connecting the screen or functional earth when required.

Efficient and versatile

These sounders can be put into different operating modes depending on local requirements. It provides high sound output at a low current, thus reducing power standby requirements and overall system cost. They are supplied with high/low volume settings as standard, allowing final audio adjustments to be made during installation.

The sounder is tone selectable during installation. 32 tone settings are available.

Safety & Security

Automatic daily self testing ensures that when the device is activated, everything works as expected. Pre-activation self testing ensures that a warning is raised before an event takes place, minimising the risk when notification is required.

Details

  • Supplied with IP rated, surface mount base accessory ensuring sufficient ingress protection for outdoor applications
  • Top, bottom or rear cable entry support for application flexibility
  • Standard first fix base shared with point detectors for ease of planning, logistics and installation
  • Base lock, address tag and surface cabling support for easy installation in all conditions
  • Loop powered with battery assisted activation allowing up to 128 devices per loop
  • 32 selectable tones at 4 selectable volume levels that can be configured from the CIE
  • Multi-stage evacuation support for application flexibility
  • Pre-and post activation self testing ensuring maximum safety
  • Automatic synchronisation
  • Tri-colour diagnostic LED indicator for fast commissioning and fault finding support

Technical specifications

General
Compatibility
Kidde Commercial Excellence Systems
Addressing method
DIL switch
Monitoring
Activated
Battery level
Continuously self-checking
Fault
Electrical
Power supply type
Batteries
Loop powered
Batteries
3 x CR123 (optional)
Operating voltage
17 to 29 VDC
Communication voltage
4 to 11 V pulsed
Current consumption
250 µA (Quiescent)
1.4 mA (Activated - from the loop with batteries installed)
Refer to installation sheet for consumption values when only loop powered
Sounder
Output level
55 to 102 dB(A) - Tone dependent
Output level adjustment
4 levels
Frequency
User selectable
Selectable tones
32
Synchronization
Supported
No. of stages
3
Physical
Physical dimensions
110 x 129 mm (Ø x H)
Net weight
465 g
Colour
Traffic white (RAL9016)
Mounting type
Base mount
Mounting position
Ceiling
Wall
Mounting base
Deep
Material
PC / ABS
Texture
Smooth
Environmental
Operating temperature
−25 to +70°C
Storage temperature
−25 to +75°C
Relative humidity
10 to 93% (noncondensing)
Environment
Indoor
Outdoor
IP rating
IP33C
Regulatory
Compliancy
CE
REACH
RoHS 3
WEEE
Certification
CPR
Standards
EN54-3