Skip to main content
Phasing out

WFA00215

Fire Retardant Cable, 2 x 1,5 mm2, PH30, 100/100 V, 200 m Reel
  • Stranded copper wire conductors
  • Special silicon rubber mix insulation
  • Halogen free sheath
  • EN 50200:2015 certified - Class PH30 rating
View all

At a glance

General

The WFA00215 is a single pair, twisted cable with screen and special silicon rubber mix insulation.

It is ideal for use in fire detection systems where circuit integrity is important.

The WFA00215 is sold in 200m lengths.

Construction

It features stranded copper wire conductors and the collective screen consist of aluminum/polyester tape, metallic side down and in contact with a solid bare copper drain wire.

Standard References

The WFA00215 is PH30 rated according to EN 50200:2015.

Additionally complies with:
BS EN 60754-1:2014,
BS EN 60754-2:2014,
BS EN 60228:2005,
BS EN 5063-1:2005,
IEC 60331-21,
IEC 60332-3.

Details

  • Stranded copper wire conductors
  • Special silicon rubber mix insulation
  • Halogen free sheath
  • EN 50200:2015 certified - Class PH30 rating

Technical specifications

General
Minimum insulation resistance
200 Mohm/km
Maximum operating voltage
100 V
Test voltage
2000 V
Conductor
Cross section
1.5 mm²
No. of conductors
2 cores
Colour of conductors
Brown and Blue
Resistance
13.6 ohm/km at +20°C
Capacitance
150 nF/km at 20°C
Inductance
1 mH/km
Physical
Outer diameter
7.3 mm
Net weight
74 kg/km
Colour
Red
Minimum bending radius 10 x Overall diameter
Environmental
Operating temperature
-30 to +180°C
-5 to +50°C (installation)
Fire Retardant rating
30 min
Regulatory
Standards
EN 50200:2015 (Class PH 30)

Downloads

All downloads

Datasheet

Other EU certificate

Certificates

If available, the downloads of the Certificates, Software & Firmware and Media are displayed in their default language.