Skip to main content

ATS1210LE

8 to 16 zone DGP input expander, large plastic housing, EN50131 Grade 3 Class II
  • 8 inputs on board
  • Expandable to 16 inputs
  • 8 OC outputs on board
  • Compatible with Axon and Advisor Advanced panels
  • ATS1647 plastic enclosure with tamper protection
View all

Related products

At a glance

Product overview

The ATS1210LE expander offers 8 standard inputs and 8 Open Collector (OC) outputs expandable to 16 inputs or 16 outputs and is provided in the ATS1647 medium plastic housing. The expanders allow to increase the inputs and outputs of an Axon or an Advisor Advanced control panel or CDC4 series door/lift controller.

Expanders

Expanders are used to expand the number of alarm inputs in an Axon panel or an Advisor Advanced system. Expanders allow inputs and outputs/relays to be connected at a location remote from an Axon or an Advisor Advanced panel. Expanders communicate via poll & reply messages. Detectors, door contacts and other detection devices are connected to expanders that report any change of state to the control panel for processing. Available expanders include support for conventional devices, wireless devices as well as intelligent addressable devices. A special expander is available, providing expansion of four to eight intelligent doors or lifts.

System databus connection

The system databus is used to connect expanders as well as keypads and readers (RASs) to Axon or the Advisor Advanced control panel. Remote devices can be up to 1.5 km from a control panels when using the preferred wiring and cable types. Keypads, readers and expanders have to be connected via a 2 pair twisted and shielded data cable to the system databus connection to achieve this. (WCAT52 is recommended). Daisy chain is the preferred wiring method. The shield of the data cable should be connected to earth at the control panel and should be left disconnected at any other end.

Functionality

Expanders provide information from remote locations to the control panels in structured records. Data collected ranges from a wired input state to wireless or addressable device dates to a door state.
Bus devices communicate with the control panel. If a failure in communication occurs, the expander remembers the last alarm in a system, preventing loss of an alarm due to a short interruption in data communication.
Up to 30 expanders can be connected to the system, depending on the variant.

Details

  • 8 inputs on board
  • Expandable to 16 inputs
  • 8 OC outputs on board
  • Compatible with Axon and Advisor Advanced panels
  • ATS1647 plastic enclosure with tamper protection
  • EN50131 Grade 3
  • PD6662:2010

Technical specifications

General
Expander type
Input expander
Product line
Advisor Advanced
ATS Master
Axon
Connection type
Databus connection
Compatibility
Advisor Advanced, Advisor Master and Axon
Max. distance from panel
1.5 km
Max. per panel
15 / 30 (depending on panel type)
Specified cable
WCAT52 / WCAT54 or equivalent
System
Addressing
DIP Switches
End-of-line resistor
Selectable
Inputs
Total
16
Onboard
8
Expandable
8 (1x ATS1202)
Outputs
Total
16
Onboard
8
Expandable
8
Type of outputs
Open Collector
Relays
Via ATS1810 / ATS1811
Maximum number of outputs
16
Electrical
Operating voltage
10.5 to 13.8 VDC
Current consumption
53 mA max.
Integrated power supply
No
Physical
Physical dimensions
120 x 240 x 40 mm
Net weight
390 gr
Material
ABS
Housing
Medium Plastic
Environmental
Operating temperature
-10 to +55°C
Relative humidity
95% noncondensing
Environment
EN50130-5 ; Class II - Indoor (general)
IP rating
IP30
Regulatory
Compliancy
CE
Certification
EN50131 Grade 3
VdS

Downloads

All downloads

Datasheet

Other EU certificate

Installation sheet

Technical documentation

Certificates

If available, the downloads of the Certificates, Software & Firmware and Media are displayed in their default language.