KL735A
KILSEN KA700 Series addressable multisensor
- Remote signalling capabilities
- Combination optical and temperature detection with fixed and rate-of-rise heat options
- Easy soft addressing (1-125)
- SMD technology
- Reliable communication protocol
Related products
At a glance
General
The KL700A series detectors use an enhanced protocol that ensures the overall integrity and error free operation of the system. All detectors are compatible with a standard base and support the connection of a remote indicator.
KL710A Heat Detector
An alarm is raised when the temperature exceeds a fixed temperature or the rate-of-rise of temperature is exceeded. It is used where a fire could cause an abrupt elevation of the temperature, or where smoke of controlled combustion, aerosols, etc. do not allow the use of any other type of detector.
KL731A/B Optical Smoke Detectors
The Tyndall optical effect of smoke in a chamber is used to detect a fire. It is used in areas where possible combustible materials, like plastics, polystyrene, PVC, etc., generate visible smoke.
For installations with false ceilings or black ceilings where detectors should not be visible, this device is also available in black with a black detector base.
The addressable optical detector is available in either white or black colours.
For installations with false ceilings or black ceilings where detectors should not be visible, this device is also available in black with a black detector base.
The addressable optical detector is available in either white or black colours.
KL735A Dual Detector
Dual technology (one photoelectric and two heat sensors) is used for accurate detection of various types of fires. The heat detection is based on a fixed and rate-of-rise response whilst the photoelectric sensor uses the Tyndall optical effect.
User Friendly
Detectors are identified by soft addressing. The address is stored in flash memory and eliminates the risk of addresses being changed without authorization. Other addressable accessories include conventional zone monitors, various in- and output units, sounder controllers, manual call points and isolators.
Details
- Remote signalling capabilities
- Combination optical and temperature detection with fixed and rate-of-rise heat options
- Easy soft addressing (1-125)
- SMD technology
- Reliable communication protocol
- Full diagnostic self testing
- Full range: Optical, Heat and Duel detectors (optical/heat)
- Full range of supporting I/O units and accessories
- EN54 Approved and CPR certified
Technical specifications
| General | ||
|---|---|---|
| Status indication |
Red (dual LED, alarm)
|
|
| Electrical | ||
|---|---|---|
| Operating voltage |
22 to 38 VDC
|
|
| Current consumption |
350 µA (quiescent at 38 VDC)
< 5 mA (in alarm)
|
|
| Detection | ||
|---|---|---|
| Coverage area |
60 to 80 m²
|
|
| Output | ||
|---|---|---|
| Remote alarm output |
available
|
|
| Physical | ||
|---|---|---|
| Physical dimensions |
51 x 99 mm (H x Ø)
|
|
| Net weight |
109 g
|
|
| Colour |
White (RAL 9010-P)
|
|
| Mounting type |
Base mount
|
|
| Environmental | ||
|---|---|---|
| Operating temperature |
-10 to +70°C
|
|
| Storage temperature |
-10 to +70°C
|
|
| Relative humidity |
0 to 95% noncondensing
|
|
| Environment |
Indoor
|
|
| IP rating |
IP42
|
|
| Regulatory | ||
|---|---|---|
| Certification |
EN54-7
|
|
Downloads
All downloadsDatasheet
Installation sheet
CPD / CPR
Certificates
DoC
DoC_10-5113-356-1899_KZ715I
DoP
Carrier F&S - DoP_360-4222-0499_KL735A
DoC
Carrier F&S - DoC_10-4222-356-0499_KL735A
Other EU certificate
If available, the downloads of the Certificates, Software & Firmware and Media are displayed in their default language.