PM861
Power supply, Switch Mode, 24 VDC, 1 A
- Fault and mains present indicators
- Battery disconnect to prevent deep discharge
- Tamperswitch
- Fault outputs
- Mains and dc fuse
Related products
At a glance
This efficiency cost effective power supply is ideal for use in Fire, Access control and general security applications.
Featuring a regulated 27.6 Vdc output supplying continuous full rated current to load plus additional current for charging twox12V standby batteries.
The highly efficient switch mode design ensures low operating costs, generates less heat and with a small physical size increases the room available for additional PCBs or cables. The modular construction simplifies maintenance.
Details
- Fault and mains present indicators
- Battery disconnect to prevent deep discharge
- Tamperswitch
- Fault outputs
- Mains and dc fuse
- Powder coated steel housing
Technical specifications
| General | ||
|---|---|---|
| Fuse(s) |
230 VAC input 2 A, 12/24 V output 1 A
|
|
| Electrical | ||
|---|---|---|
| Mains input |
230 VAC
50/60 Hz ±10%
|
|
| Output | ||
|---|---|---|
| Power output voltage |
27.6 VDC
|
|
| Output ripple |
100 mV pk-pk max.
|
|
| Power output current mains |
1 A
|
|
| Battery | ||
|---|---|---|
| Max. Battery capacity |
7.2 Ah (x2)
|
|
| Battery charge current |
0.5 A
|
|
| Battery recharge time |
20 hours
|
|
| Battery disconnect voltage |
19.6 ±0.2 VDC
|
|
| Physical | ||
|---|---|---|
| Physical dimensions |
330 x 275 x 80 mm (W x H x D)
|
|
| Colour |
White
|
|
| Form factor |
Steel cabinet
|
|
| Environmental | ||
|---|---|---|
| Operating temperature |
-10 to +40°C
|
|
| Relative humidity |
95%
|
|
| Regulatory | ||
|---|---|---|
| Compliancy |
CE
REACH
RoHS 2
WEEE
|
|
| Load output | ||
|---|---|---|
| 0.5 A | ||
| Open collector output | ||
|---|---|---|
| Open circuit on | ||
| fault or mains fail | ||
| Housing (steel) powder coated | ||
|---|---|---|
| 1.2 mm | ||
Downloads
All downloadsDatasheet
Installation sheet
Certificates
If available, the downloads of the Certificates, Software & Firmware and Media are displayed in their default language.